If the distance varies more than 1/8”, adjust the limb bolts the same amount in OPPOSITE directions until the tiller is correct.įor example, if the top limb bolt is turned clockwise a half a turn, the bottom limb bolt must be turned counter clockwise a half a turn.
If the distance is the same, no adjustment is required. The distance from the riser to the string, asshown in the photo below, should be the same for both the top and bottom limbs. Set tiller: Check tiller before making any other adjustments. Turn both limb bolts equal amounts for the initial setting.5. Set Draw weight: Adjust draw weight to the desired level by turning the limb bolts clockwise to increaseweight and counter-clockwise to decrease weight. Check all screws and bolts to insure they are not loose, including rubber dampers and cam modules and/or inner cams.4. Inspect the bow to insure that the cables and string are in their tracks on the cam and attached to the postsproperly. Read the Owner’s Guide before using the product.3. Remove bow from plastic bag and remove the owner’s guide and otherpromotional material from the bow.2. Compound Bow Set-Up & Tuning ProcedureRev 02/12/081.
0 kommentar(er)
